Design Of Bedside Monitor Based On Microcontroller

Main Article Content

Bambang Guruh Irianto
Agus Susilo Wibowo
Dwi Herry Andayani

Abstract

A Bedside monitor is the equipment used to monitor patient condition through some parameters that need sustainable monitoring so that the patient condition is always monitored. This research is monitored by 5 parameters namely heart signal, heart rate, temperature, respiration and SPO2. This research applies quasi experimental design. The free variable is an ECG phantom or human, and the dependent variable is a bedside monitor. The research instruments are a calibration equipment of ECG signal, temperature, and respiration. The result of the heart signal lead 2 is not different from the standard and the result of the heart rate lead has uncertainty (probability) 0 for Lead 2; which is still under the tolerance number (0.5). The results of the temperature measurement of 5 samples with 5 measurements show that there are 3 samples which have standard deviation and 0 (zero) uncertainty, whereas 2 samples have 0.76 (higher than 0.5) uncertainty. This condition is influenced by the patient movements, so the sensor attached on the patient-body does not fit with the standard installation. The respiration measurement results have an accuracy of 98%, while the SPO2 results have a standard deviation and uncertainty below 5% after being compared with the standard calculations. Here are the details: standard deviation 0.894427; 0.547723; 0.44; Probability 0.4; 0.244949; 0.2 and 0.2. Overall, it can be concluded that The Design of  Bedside Monitor Based on Microcontroller is feasible and the measurement result of heart signal Lead 2, heart rate, temperature, respiration, SPO2 can be presented on a PC.

Downloads

Download data is not yet available.

Article Details

How to Cite
[1]
B. G. Irianto, A. S. Wibowo, and D. H. Andayani, “Design Of Bedside Monitor Based On Microcontroller”, INFOTEL, vol. 11, no. 4, pp. 121-126, Nov. 2019.
Section
Articles

References

[1] A. Agnihotri, "Human Body Respiration Measurement Using Digital Temperature Sensor with I2c Interface," vol. 3, no. 3, pp. 1-8, 2013.
[2] F. Sudhindra, S. J. Annarao, R. M. Vani, and P. V Hunagund, "Development of Real Time Human Body Temperature ( Hypothermia & Hyperthermia ) Monitoring & Alert System with GSM & GPS," pp. 9355-9362, 2016.
[3] R. Niedermann, E. Wyss, and S. Annaheim, "Prediction of human core body temperature using non-invasive measurement methods," no. June, 2013.
[4] S. Mouzam, M. Daud, S. Ali, and A. Q. Ansari, "Design of Android-Based Remote Patient Monitoring System," vol. 9, no. 6, pp. 189-192, 2018.
[5] O. S. Non-invasive and P. Y. Mallo, "Rancang Bangun Alat Ukur Kadar Hemoglobin dan Oksigen Dalam Darah dengan Sensor," no. 1.
[6] Jaber Al- Ziarjiwey`, "Heart rate monitoring and pqrst detection based on graphical user interface with MATLAB," vol. 5, no. 4, 2015.
[7] A. L. Mamun et al., "A microcontroller-based automatic heart rate counting system from fingertip," J. Theor. Appl. Inf. Technol., vol. 62, no. 3, pp. 597-604, 2014.
[8] E. Jahan, T. Barua, and U. Salma, "AN OVERVIEW ON HEART RATE MONITORING," vol. 3, no. 5, pp. 148-152, 2014.
[9] Q. Zhang, D. Zhou, and X. Zeng, "Hear the heart: Daily cardiac health monitoring using Ear-ECG and machine learning," in Ubiquitous Computing, Electronics and Mobile Communication Conference (UEMCON), 2017 IEEE 8th Annual, 2017, pp. 448-451.
[10] B. G. Irianto, B. Budhiaji, and S. Syaifudin, "Design of electro cardiograph machine based on ATmega microcontroller," Indones. J. Electr. Eng. Comput. Sci., 2016.
[11] G. D. Gargiulo, "True unipolar ECG machine for Wilson Central Terminal measurements," Biomed Res. Int., vol. 2015, 2015.
[12] A. Yani and K. Kunci, "PENERAPAN ANFIS UNTUK PENGENALAN SINYAL EKG."
[13] S. Setiawidayat, D. Sargowo, S. P. Sakti, and S. Andarini, "The peak of the PQRST and the trajectory path of each cycle of the ECG 12-lead wave," Indones. J. Electr. Eng. Comput. Sci., vol. 4, no. 1, pp. 169-175, 2016.
[14] C. Engineering, "ECG De-noising using Hybrid Linearization Method," vol. 15, no. 3, pp. 504-508, 2015.
[15] X. Peng, H. Zhang, and J. Liu, "An ECG Compressed Sensing Method of Low Power Body Area Network," vol. 12, no. 1, pp. 292-303, 2014.
[16] B. G. Irianto and D. H. Andayani, "A low-cost electro-cardiograph machine equipped with sensitivity and paper speed option," vol. 17, no. 3, pp. 1275-1281, 2019.