Modulasi Digital Menggunakan Matlab

Main Article Content

Wahyu Pamungkas
Anggun Fitrian Isnawati
Adi Kurniawan


In telecommunication systems, the determination of the modulation system is an important method in the process of sending information from transmitter to receiver. In the simulation that is done using QPSK modulation system (Quadrature Phase Shift Keying), 8-QAM (Quadrature Amplitude Modulation), 16-QAM (16-Quadrature Amplitude Modulation) that uses AWGN (Additive White Gaussian Noise) channel in the transmission system uses MATLAB software. The execution of the simulation is aimed to describe how the characteristics of the waveform of each block of the modulator, to add noise in the AWGN channel and demodulator. Performance of modulation system testing is used BER (bit error ratio) method. Looking of the faults of comparison bits results of before and after the transmitted bits by using Monte Carlo simulation model. Testing on this simulation using the input data as much as 10.000 data symbols randomly and the level of Eb/No that is various for each modulation used. Performance results BER with the level of Eb / No at 1 dB of the simulated system modulation on the BER values obtained for QPSK 0.0570, 8-QAM at 0.1085 while the 16-QAM at 0.1582 and then the performance of QPSK modulation is the best. If the Eb / No is increased to 8 dB then the becomes BER QPSK smaller modulation is equal to 0.00035, the 8-QAM BER obtained at 0.0076, while the 16-QAM modulation to be 0.0139


Download data is not yet available.

Article Details

How to Cite
W. Pamungkas, A. Isnawati, and A. Kurniawan, “Modulasi Digital Menggunakan Matlab”, INFOTEL, vol. 4, no. 2, pp. 1-9, Nov. 2012.


1. Aminuddin, J. (2008). Dasar-Dasar Fisika Komputasi Menggunakan Matlab. Yogyakarta: Gava Media.
2. Blanchet, G., & Charbit, M. (2006). Digital Signal and Image Prosesing Using MATLAB. London: ISTE Ltd.
3. Cahyo, W. N. (2008). Pendekatan Simulasi Monte Carlo untuk Pemilihan Alternatif dengan Decision Tree pada Niali Outcome yang Probabilistik. Teknik Industri Fakultas Teknologi Industri Universtias Islam Indonesia Yogyakarta , 7.
4. Chaparo, L. (2010). Signal and System Using MATLAB. Burlington: Elsevier.
5. Faridah, L., & Pratiarso, A. (2009). Pembuatan Modul Praktikum Teknik Modulasi Digital 8-QAM, 16-QAM dan 64-QAM Menggunakan Software. Teknik Telekomunikasi Fakultas Politeknik Elektronika Negeri Surabaya , 6.
6. G.Proakis, J., & Salehi, M. (1998). Contemporary Communication Using MATLAB . Boston: PWS Publishing Company.
7. Hapsara, A. K., & Susanto, I. (2007, 2 4). Kinerja Modulasi Digital dengan Metode PSK (Phase Shift Keying). Teknik Elektro Fakultas Teknik Universitas Diponegoro , p. 8.
8. Harada, H., & Prasad, R. (2003). Simulation and Software Radio for Mobile Communication. Artech House Universal Personal Communications: Canton Street Norwood.
9. Haykin, S. (2000). Communication System.4th ed. Library of Congress Cataloging-inPublication Data. New york.
10. (n.d.). Retrieved 10 14, 2011, from
11. M.Hussain, Z., Z.Sadik, A., & O'shea, P. (2011). Digital Signal Processing And Introduction with MATLAB and ApPlication. New York: Springer Heidelberg Dordrecht London.
12. Moh.Nazir, P. (2005). Metode Penelitian. Bogor: Ghalia Indonesia.
13. Novia, P., & Pratiarso, A. (2010). Pembuatan Modul Praktikum Teknik Modulasi Digital FSK, BPSK dan QPSK Menggunakan Software. Teknik Telekomunikasi Fakultas Politeknik Elektronika Negeri Surabaya , 7.
14. Sklar, B. (2006). Digital Communications Fundamentals and Applications Second Edition. New Jersey: Prentice Hall PTR.
15. Stallings, W. (2007). Komunikasi & Jaringan Nirkabel jilid 2 . jakarta: Erlangga.
16. Xiong, F. (2000). Digital Modulation Technique. Canton Street Norwood: Artech House Telecomunication Library.

Most read articles by the same author(s)

1 2 > >>