Performance Analysis and Automatic Prototype Aquaponic of System Design Based on Internet of Things (IoT) using MQTT Protocol

Main Article Content

Ratnasih Ratnasih Doan Perdana Yoseph Gustommy Bisono

Abstract

The Aquaponic is a farming system which need of attention because their system will mutually influence each other. Then using IoT technologies, can be made aquaponic that can automatically control and monitoring the aquaponic. The prototype using nodeMCU as a microcontroller, and for communication, the system using MQTT protocol and android application as a user interface. The purpose of this research is to provide convenience for aquaponic user to be able to control remotely. In addition, this research aims is to analysis the QoS performance of the prototype. This research uses 2 scenario testing, there is with changing the distance between sensor nodes and access point, and testing the system in a normal state. Based on the results of the testing that has been done, the farther the distance range of the sensors node with access point then declining system performance. But in the normal state test,  the median value of the mean delay  was 0.10512s and the median value average throughput is 566 Bytes/s. In addition the median value  also obtained the mean availibity and realibity system that is 98.258% and 98.204%. Refers to the standard TIPHON (DTR/TIPHON-05001), the QoS performance of this system include excellent category.

Downloads

Download data is not yet available.

Article Details

How to Cite
RATNASIH, Ratnasih; PERDANA, Doan; BISONO, Yoseph Gustommy. Performance Analysis and Automatic Prototype Aquaponic of System Design Based on Internet of Things (IoT) using MQTT Protocol. JURNAL INFOTEL, [S.l.], v. 10, n. 3, aug. 2018. ISSN 2460-0997. Available at: <http://ejournal.st3telkom.ac.id/index.php/infotel/article/view/388>. Date accessed: 22 sep. 2018. doi: https://doi.org/10.20895/infotel.v10i3.388.
Section
Articles

References

[1] H. Lehman, E. Clark and S. Weise, "Clarifying the definition of Sustainable agriculture," J. Agric. Environ., vol. 6, pp. 127-143, September 2014.
[2] P. A. A. Simao, "IoT Platforms for Building Automation With Energy Efficiency and Comfrot Concerns," FCT, December, 2017.
[3] M. I. Denatama, D. Perdana and R. M. Negara, "Analisis Perbandingan Kinerja Protokol Routing DSDV dan OLSR untuk Perubahan Kecepatan Mobilitas pada Standar IEEE 802.11ah," Infotel, vol. 8, no. 2, 2016.
[4] International Business Mechines Corporation (IBM) Eurotech, MQTT V3.1 Protocol Specification, IBM.
[5] A. F. Ma'arif, I. A. Wijaya, A. N. Ghani and A. S. Wijaya, "Sistem Monitoring Dan Controlling Air Nutrisi Aquaponik Menggunakan Arduino Uno Berbasis Web Server," KINETIK, vol. 1, no. 1, pp. 39-46, Mei 2016.
[6] W. Vernandhes and N. S. Salahuddin, "Smart Aquaponic with Monitoring and Control System Based on IoT," ResearchGate, November 2017.
[7] G. Y. Saputra, A. D. Afrizal, F. K. R. Mahfud, F. A. Pribadi and F. J. Pamungkas, "Penerapan Protokol MQTT pada Teknologi WAN (Studi Kasus Sistem Parkir Universitas Brawijaya)," Jurnal Informatika Mulawarman, vol. 12, no. 2, 2017.
[8] S. G. Aurelien, F. Joffrey and O. Thomas, "Aquaponics connected Greenhouse," I-GREENHOUSE , April, 2018.
[9] M. H. Amaran, N. A. M. Noh, M. S. Rohmad and H. Hashim, "A Comparioson of Lightwight Communication Protocols in Robotic Applications," IRIS, pp. 400-405, 2015.
[10] R. E. S. Dauhan and E. Efendi, "Efektivitas Sistem Akuaponik dalam Mereduksi Konsenstrasi Amonia pada Sistem Budidaya Ikan," e-Jurnal Rekayasa dan Teknologi Budidaya Perairan, vol. 3, no. 1, 2014.
[11] The Pinsta, "The Pinsta," [Online]. Available: http://www.thepinsta.com/hydroponic-gardens-the-lettuce-raft-method. [Accessed 21 August 2018].
[12] M. A. Prada, P. Reguera and S. Alonso, "Communication with Resource Constrained Devise through MQTT for Control Ecudacation," IFAC, pp. 150-155, 2016.
[13] N. Tantitharanukul, K. Osathanunkul , K. Hantrakul, P. Pramokchon and P. Khoenkaw , "MQTT-Topic Naming Criteria of Open Data For Smart Cities," IEEE, 2016.
[14] A. Banks and R. Gupta, "MQTT version 3.1.1," OASIS Standard, 2014.
[15] A. Niruntasukrat, C. Issariyapat, P. Pongpaibool, K. Maesublak, P. Aiumsupucgul and A. Panya, "Authorization mechanism for MQTT-based Internet of Things," IEEE, pp. 290-295, 2016.
[16] D. Perdana, R. Munadi and R. C. Manurung, "Performance Evaluation of Gauss-Markov Mobility Model in Hybrid LTE-VANET Networks," TELKOMNIKA, vol. 15, no. 2, pp. 606-621, 2017.
[17] A. Al-Fuqaha, M. Guizani, M. Mohammadi, M. Aledhari and M. Ayyash, "Internet of Things: A Survey on Enabling Technologies, Protocols, and Applications," IEEE, vol. 17, no. 4, 2015.
[18] D. Hamilton, "The Four Internet of Things Connectivity Models Explained," 2016. [Online]. Available: http://www.thewhir.com/web-hosting-news/the-four-internetof-things-connectivity-models-explained. [Accessed 20 Mei 2018].
[19] R. Wulandari, "Analisis QoS (Quality of Service) pada Jairingan Internet (Studi Kasus: UPT Loka Uji Teknik Penambangan Jampang Kulon - LIPI)," Jurnal Teknik Informatika dan Sistem Informasi, vol. 2, no. 2, 2016.
[20] R. J. Hyndman and A. B. Koehler, "Another Look at Measures of Forecast Accuracy," International Journal of Forecasting, vol. 22, no. 4, pp. 679-688, 2006.
[21] J. Domaschka, C. B. Hauser and B. Erb, "Reliability and Availabilitu Properties of Distributed Database Systems," in IEEE 18th International Enterprise Distributed Object Computing Conference, 2014.
[22] M. F. Khan and E. A. Felemban, "Performance Analysis on Packet Delivery Ratio and End-To-End Delay of Different Network Topologies in Wireless Sensor Networks (WSNs)," in IEEE 9th International Conference on Mobile Ad-Hoc and Sensor Networks, 2013.